Light2match X-II/DT: Light sources D65 and TL84

UnityColor^® Standard Light Luminaire with 2 Light Sources D65 & TL84

This ceiling lamp Light2match X-II offers 2 lightsource2 D65 each with 2000 lx for metamerism check.

Technical specifications:

• Ceiling light for usable width of the work surface approx. 1 m, for larger products several lights can be mounted side by side (see selection menu set of 2)
• microprismatic UV-transparent light diffusion plate for homogeneous light distribution
• Suspension approx. 1 m away from the work surface
• Illuminance daylight D65 ~ 2000 lux
• Illuminance Shop lighting TL84 ~ 2000 Lux
• UVA light for optical brighteners
• The luminaire meets the requirements of DIN ISO 3668 for visual color evaluation of coatings
• Ceiling light with 4 suspension eyes for rope / chain suspension, also with screws for ceiling installation (at least 10 cm distance to the ceiling for heat dissipation)
• Housing dimensions 124 x 80 x 16 cm
• Connection 230 V / 50/60 Hz, protection at least B16 A

The height of the work surface should be approximately 90 - 100 cm from the floor in a standing workstation for visual color matching. Depending on the size of the person also higher, so that the 45 ° angle is observed on the samples.
The workstation should be installed in a darkened room or room corner with minimum extraneous light influencing the light quality of the luminaire.
Above-mentioned illuminance levels refer to the center of the work surface, depending on the ambient color, wall color or brightness.

Ceiling lights with natural light and a metameric light (here TL84) we recommend for the following applications:

• Color testing of standards and samples under daylight without the need for metamerism testing
• Inspection of vehicle accessories, interior parts and other samples that are too big for a standard light cabin
• Color sorting of products, spare parts, food

For more information or a sensible planning for larger rooms, we are pleased to give you advice.

Delivery:

• Luminaire housing with light diffusion discs
• All fluorescent lamps
• Threaded rods with suspension eyes, stainless steel chain, carabiner (without dowel for the ceiling)
• Power cable, control cable
• Electronic control unit for wall mounting
• Control panel for under-counter mounting or for milling in the table top